Refractory Materials
Refractory Castables
GYM-1, GYM-2 and GYM-3 castables for furnace and boiler lining requirements.
View Details
View photo ↗Product reference images. Confirm the grade, dimensions and installation requirements before ordering.
Refractory Materials
Model / part reference: LZ-80 / LZ-75 / LZ-70 / LZ-65 / LZ-55 / LZ-48
LZ-series high-alumina bricks for furnace and kiln lining enquiries.
Formed and fired alumina-bearing refractory bricks. Compare the listed LZ grades using alumina content, apparent porosity, cold crushing strength and refractoriness under load. Send the brick drawing, lining position, operating temperature and chemical exposure to check the required grade.
Furnace and kiln linings, including blast furnaces, hot-blast stoves and rotary kilns, subject to grade and lining-design confirmation.
Send the equipment and lining or casting position, drawing or dimensions, operating temperature, steel or process grade, existing material specification and required quantity. Test methods, installation requirements and supply scope are confirmed before quotation.
Send drawings, part numbers or photos and your required quantity. Supply scope and technical requirements are reviewed before quotation.
| Property / condition | Unit | LZ-80 | LZ-75 | LZ-70 | LZ-65 | LZ-55 | LZ-48 |
|---|---|---|---|---|---|---|---|
| Al2O3 | % | ≥80 | ≥75 | ≥70 | ≥65 | ≥55 | ≥48 |
| Apparent porosity | % | ≤21 | ≤24 | ≤24 | ≤24 | ≤22 | ≤22 |
| Cold crushing strength | MPa | ≥70 | ≥60 | ≥55 | ≥50 | ≥45 | ≥40 |
| Refractoriness under load, initial softening at 0.2 MPa | °C | ≥1530 | ≥1520 | ≥1510 | ≥1500 | ≥1450 | ≥1420 |
| Permanent linear change after heating | % | -0.4 to +0.2 | -0.4 to +0.2 | -0.4 to +0.1 | -0.4 to +0.1 | -0.4 to +0.1 | -0.4 to +0.1 |
| Heating condition for permanent linear change | °C × h | 1500 × 2 | 1500 × 2 | 1450 × 2 | 1450 × 2 | 1450 × 2 | 1450 × 2 |
Reference grade data. Agree the applicable test methods, tolerances and acceptance requirements before ordering. Refractoriness under load is not a maximum service-temperature rating.
Refractory Materials
GYM-1, GYM-2 and GYM-3 castables for furnace and boiler lining requirements.
View DetailsRefractory Materials
Sizing nozzles for controlling steel flow in billet continuous casting.
View DetailsRefractory Materials
Mould flux, also called mold powder, for continuous casting enquiries.
View Details