Slitting · Entry
Pre-slitting / Slitting Entry Guide
Entry guide for pre-slitting and slitting applications.
Prepare inquiryRolling mill guides · Product range
Slitting Guides
Slitting-related guides support stock guidance and strand separation in multi-strand rebar rolling. Entry guides and exit guides have different tasks within the pass sequence; the required configuration depends on the strand arrangement and stand position.
Product photos
9 photos · Select an image for a closer look
Slitting · Exit
Five-strand Slitting Exit Guide
Exit guide for five-strand slitting application.
Prepare inquiry
Slitting · Exit
Four-strand Slitting Exit Guide
Exit guide for four-strand slitting application.
Prepare inquiry
Slitting · Exit
Three-strand Slitting Exit Guide
Exit guide assembly for a three-strand slitting line.
Prepare inquiry
Slitting · K2 entry
Three-strand K2 Entry Guide
Three-strand entry guide identified as K2 in the supplied photo reference.
Prepare inquiry
Slitting · K1 entry
Three-strand K1 Entry Guide
Three-strand entry guide identified as K1 in the supplied photo reference.
Prepare inquiry
Slitting · Exit
Two-strand Slitting Exit Guide
Slitting exit guide assembly for a two-strand application.
Prepare inquiry
Slitting · Exit · Three strand
Large Three-strand Slitting Exit Guide
Three-strand exit guide in the photographed large-format configuration.
Prepare inquiry
Slitting · Extra large
Extra-large Slitting Exit Guide
Slitting exit guide assembly in the photographed extra-large configuration.
Prepare inquiryReplacement check
Start with the application.
We can check the replacement possibility based on your photos, drawings, part numbers, or working conditions.
Prepare your inquiry →- Position and passStand number, entry or exit location, stock section and pass information.
- Drawing or photosPart number, assembly drawing or clear views of the existing guide.
- Mounting dimensionsBase, bolt pattern, centre height and relevant assembly interfaces.
- Working conditionsCooling, lubrication, current problem and required quantity.
Before inquiry
Common questions about Slitting Guides
Are K1 and K2 universal guide positions?
No. Confirm these references against your mill's actual pass sequence and stand layout before specifying an entry guide.
What is needed to check a slitting-guide replacement?
Provide strand number, pass sequence, entry or exit position, mounting drawing and photos of the existing guide.
Contact
Product inquiries
Prepare the product name or photo reference, your drawing or photos, and the required quantity.
Prepare inquiry Email[email protected]WhatsApp+86 182 5680 4948
Create a draft to copy or download. This page does not send inquiries.