Roller Entry Guides
Position incoming stock before the roll pass.
View 7 photosProduct range
Rolling Mill Guides & Parts
Browse by guide type and application. Choose a category to see the product photos and the information needed for replacement checking.
Download catalog (PDF)Slitting Guides
Entry and exit guides for multi-strand rolling.
View 9 photosRoller Twister Guides
Change stock orientation between rolling passes.
View 3 photosStatic / Friction Guides
Guide stock through fixed contact surfaces.
View 6 photosGuides for Round Bar Mills
Two-roller and four-roller entry arrangements.
View 3 photosGuide Rollers & Spare Parts
Guide rollers and support arms.
View 3 photosNot sure which guide category to choose?
Start with the task at the stand. Use the links below to view the relevant product photos, then check the actual pass and mounting requirements.
| Required task | Start here | Key information |
|---|---|---|
| Position stock before the roll pass | Roller Entry Guides / Guides for Round Bar Mills | Incoming section, pass drawing and guide opening |
| Guide stock for multi-strand slit rolling | Slitting Guides | Strand number, pass sequence and entry / exit position |
| Change stock orientation between passes | Roller Twister Guides | Turning direction, required angle and stand arrangement |
| Guide stock through fixed contact surfaces | Static / Friction Guides | Passage shape, wear surfaces and mounting dimensions |
| Replace a roller or support arm | Guide Rollers & Spare Parts | Part drawing, assembly interfaces and quantity |
Specify whether each size refers to incoming stock, the finished product, a guide roller or the guide opening. Include units and a drawing reference.
Material and component selection notes →
Round Bar Guides is an application group within roller guiding. Photo A/B labels distinguish the supplied photos; they are not standardized model suffixes.
Replacement check
Start with the application.
We can check the replacement possibility based on your photos, drawings, part numbers, or working conditions.
Prepare your inquiry →- Position and passStand number, entry or exit location, stock section and pass information.
- Drawing or photosPart number, assembly drawing or clear views of the existing guide.
- Mounting dimensionsBase, bolt pattern, centre height and relevant assembly interfaces.
- Working conditionsCooling, lubrication, current problem and required quantity.
Contact
Product inquiries
Prepare the product name or photo reference, your drawing or photos, and the required quantity.
Prepare inquiry Email[email protected]WhatsApp+86 182 5680 4948
Create a draft to copy or download. This page does not send inquiries.