Entry guidance for long-product mills.
Rolling mill guide manufacturer
Rolling Mill Guides & Guide Rollers
for Bar, Rebar, Wire Rod and Section Mills
We supply roller guides, slitting guides, twist guides and guide rollers for long-product rolling mills. We can check the replacement possibility based on your photos, drawings, part numbers, or working conditions.
ApplicationBar, Rebar, Wire Rod & Section Mills
Replacement BasisDrawing, Sample, Photos or Verified Dimensions
Product RangeEntry, Exit, Slitting, Twist & Guide Rollers
Product range
Find the guide for your application.
Browse by guide type and application. Select a category to view product photos and the details needed for replacement checking.
Entry and exit guides for multi-strand rolling.
Stock orientation between rolling passes.
Fixed-surface entry and exit guidance.
Two-roller and four-roller entry arrangements.
Guide rollers and support arms.
Capabilities
From components to complete guide assemblies.
Engineering review, precision machining, assembly and dimensional inspection for rolling mill guide applications.
Engineering Review
Replacement requirements are reviewed against drawings, samples and application data.
Machining
Guide bodies, rollers and related components are manufactured according to confirmed technical requirements.
Assembly
Guide assemblies are checked according to the confirmed configuration before delivery.
Inspection
Critical dimensions and interfaces are checked before shipment.
Workshop
Inside the workshop
Machining equipment, working areas and guide assemblies.
View more workshop photos
Services
Replacement and technical support.
We can check the replacement possibility based on your photos, drawings, part numbers, samples or working conditions.
Replacement Review
Compare the available drawing, sample, part number or photos with the required mounting and operating conditions.
Custom Manufacturing
Manufacture guide bodies, rollers, wear parts and assemblies after critical dimensions and interfaces are confirmed.
Problem Assessment
Review wear, bearing failure, cobbles, surface marks, cooling and alignment information before proposing a solution.
View the replacement checklist
- Identify the positionConfirm stand number, entry or exit position, rolled product, pass and mill arrangement.
- Verify the interfaceCheck mounting faces, bolt holes, restbar, center height, guide base and adjustment method.
- Confirm moving partsCheck roller opening, roller groove, shaft, bearing, seal and lubrication arrangement.
- Review the operating problemReview roller wear, bearing failure, cobble, scratches, cooling problems or unstable guiding.
Technical boundary: Photos can support a preliminary review, but final manufacturing approval may require drawings, verified dimensions, samples, pass information and operating conditions. Slitting, twist and high-speed applications require more complete technical data.
Inquiry information
Prepare your inquiry.
Start with the guide model, a drawing or clear photos, and the stand position. Add dimensions and operating conditions where available.
Prepare a product inquiry
What to include with your inquiry
- Guide positionStand number, guide type, entry or exit position
- Rolled productProduct section, pass and finished size range
- Drawing or sampleAssembly drawing preferred if available
- Clear photosFront, side, bottom and mounting faces
- Key dimensionsCenter height, mounting holes, roller and bearing interfaces
- Current problemWear pattern, bearing failure, cobble, scratches or short service life
Common guide problems and initial checks
These checks are starting points for investigation, not a diagnosis.
Fast roller wear
Check roller contact, groove profile, guide alignment, cooling, scale abrasion, roller material and heat treatment.
Bearing failure
Check contamination, water ingress, shaft and bearing fits, sealing, operating temperature and lubrication.
Cobble near the stand
Check bar approach, guide opening, centerline, pass relationship and delivery direction.
Surface scratches
Check seized rollers, worn inserts, internal scale buildup, incorrect opening and guide alignment.
About Shanghai Saino
Focused on rolling mill guides and replacement parts.
Shanghai Saino Precision Machinery Co., Ltd supplies rolling mill guides, guide rollers and related replacement parts for bar, rebar, wire rod and section mills.
Our working process starts with the actual application. We review the stand position, mounting interface, pass requirements and operating problem before confirming a replacement proposal.
Discuss your applicationBefore inquiry
Ten practical answers.
Can you check a guide without an original drawing?
A preliminary check may be possible from a measured sample, clear multi-angle photos and verified dimensions. Final production still needs enough information to confirm all critical interfaces.
Is one overall photo enough?
Usually not for a complete guide assembly. Add stand position, mounting-face photos, reference dimensions and the current operating problem.
Can service life be guaranteed from photos?
No. Service life also depends on material, heat treatment, fit, alignment, cooling, lubrication, speed, scale and operating practice.
Can you produce according to an existing guide sample?
Yes, a physical sample can support replacement checking when the original drawing is unavailable. Critical dimensions, mounting interfaces and application conditions still need to be confirmed before manufacturing.
How is lead time estimated?
Lead time is quoted after the guide configuration, quantity, drawing and production scope are confirmed. Ask for a schedule for your specific order.
Can we start with a small trial order based on a sample?
We can review the feasibility of a trial order after checking the sample, critical dimensions and application. Quantity and any minimum order requirement will be confirmed in the quotation.
How are guides packed and shipped?
Packing and shipping arrangements are confirmed for each order based on the product, destination and agreed delivery terms. State any special protection or marking requirements before quotation.
What payment terms do you offer?
Payment terms are confirmed in the quotation or contract for each order. Please ask before placing an order; this website does not state a standard payment term.
Can material or inspection reports be supplied?
Please state which reports, test methods and acceptance criteria you require at the inquiry stage. Availability and scope must be confirmed for the specific order before production.
How is a custom guide confirmed before production?
Send the application, drawing or sample, mounting dimensions and operating conditions. The replacement proposal and critical interfaces must be reviewed and agreed before manufacture.
Rolling mill guide inquiry
Product inquiries.
Send your guide drawing, guide model, photos, stand position or current operating problem. We will review the available information before preparing a replacement proposal.
Email[email protected]WhatsApp+86 182 5680 4948Prepare inquiry Create a draft to copy or download. This page does not send inquiries.